Tempir Pulse Oximeter Review

Tempir Pulse Oximeter Reviewed By Qteros Experts

Rank
 
Product Name
Score
 

Last update on 2020-07-04 / Affiliate links / Images from Amazon Product Advertising API

In this article, we will review the Tempir Pulse Oximeter, how it works, is this a good brand of pulse oximeter and How accurate are finger pulse oximeters?

So we’ll start the review by just on packaging the device as its received and then we’ll just show you how simple it is to use this pulse oximeter the temper, our also clean the set comes with everything you need, including some instructions warranty card, two triple A Batteries a lanyard to attach the device and the protective carry case just pop the back off by sliding it in the direction shown by narrow, insert the two triple A batteries.

Related Posts  10 Best Portable UV Sterilizers of 2020

And you ready to go just press the button to turn the pulse oximeter on and within. A few seconds, the device is ready to take your first spo2 reading the two blue figures.

TempIR Pulse Oximeter reviewed by Qteros

On the left hand side you have my percent of spo2 and, on the right hand, side the pulse rate in beats per minute. The bleep is the milan that i’ve set on a pulse alarming when the pulse rate goes below 50 pressing.

The button during operation will rotate the screen into one of four different orientations: giving convenient access to the data from any angle to enter the settings menus.

Just press and hold the button for a couple of seconds: there are two menus sound set up an alarm setup. This is the alarm setup menu.

There’S an upper and lower spo2 alarm, no upper and lower pulse rate alarm a bottom plus or minus – determines whether you’re going to be increasing or decreasing an alarm parameter.

TempIR Pulse Oximeter reviewed by Qteros

Currently this is set to plus. So if I go to spo2 alarm low and press it and hold it, it will increase it.

If I change that to minus and you’re back to s go to hold it, it was decrease setting an spo2 alarm of 84 there and now increasing the pulse rate from 50 to 60, and this is a fan setup menu where you can toggle the alarm.

The beep and a demo on or off or you can store back to factory settings and now I’m back into the alarm setup.

Okay.

So this is the end of my review of the temp IR pulse oximeter.

I’M not going to comment on the clinical accuracy of the device, because that’s not something I’m Paula for to do so, however, for ease of use, build quality, consistency results across all members of the friends and families have used it.

It’S getting a 5 out of 5 star review from us, a cardio critic and comes highly recommended.

Leave a Comment

Scroll to Top